If you applied plasti dip correctly, you shouldn’t have to use anything when removing it. One of the perks of using plasti dip is that it’s designed to peel off smoothly.
Most people who struggle with peeling plasti dip usually don’t use the correct application methods. For instance, they may have sprayed only light coats.
Anyway, today’s article is not about how to apply plasti dip to your car. Our primary focus is Goo gone and whether it can remove plasti dip.
What is Goo Gone?
Goo Gone has been around for years, and it has several applications in the auto industry. This product can be used to clean stubborn stains on vehicles.
This includes grime and dirt. It is an oil-based solvent whose manufacturer claims it can be used on pretty much any surface.
It is very effective at removing stains and has therefore gained worldwide recognition from car owners. It is safe to use on car paint and other parts of the vehicle.
However, you can never always be too sure about cleaners. Therefore, even if you decide to use it, never leave Goo Gone on your car paint for long.
Can Goo Gone Remove Plasti Dip?
The plasti dip manufacturer recommends that it be peeled off from a surface. As mentioned earlier, plasti dip sprayed on correctly should peel without any fuss.
But, there are times when you may have sprayed it incorrectly. Or, you are trying to remove plasti dip on hard-to-reach areas such as around the lug nuts in your rims.
You may be tempted to use a cleaner such as Goo Gone in such a scenario.
Well, you will be glad to know that plasti dip comes off easily when sprayed with Goo Gone. What it does is that it gets absorbed by Goo Gone—allowing you to wipe it off easily with a clean cloth.
If you have some plasti dip that is challenging to remove, you can grab some goo gone and let it do its magic.
But, how effective is it? Goo Gone is an effective method of getting rid of plasti dip. In some special cases, you may have to let Goo Gone sit on the plasti dip for a while so that it can get absorbed. Remember not to let it sit for too long.
How to Use Goo Gone to Remove Plasti Dip?
The process is relatively easy. That’s why many people love it. Here is a quick step-by-step guide on using Goo Gone to get rid of plasti dip.
-
Step 1
You will need to get your hands on some Goo Gone. That shouldn’t be very hard because it is a popular product available in most stores.
-
Step 2
Apply the Goo Gone on the Plasti Dip. This should take less than a minute. Ensure that you spread the Goo Gone evenly on the plasti dip.
-
Step 3
Give it a minute or two. The importance of doing this is to let the Goo Gone get absorbed into the plasti dip so that it can eat it up.
-
Step 4
Wipe off the plasti dip residue with a clean cloth. This should work. But, there are cases of stubborn plasti dip declining to come off. Here you may have to add some elbow grease.
Get a clean microfiber cloth and scrub on the plasti dip with some Goo Gone. It should come off in a minute or two. Please be very gentle if you are removing plasti dip on car paint.
Rough scrubbing can result in scratches on the paint. Once the plasti dip comes off, clean the area with car wash shampoo and rinse it off with some water.
When to Use Goo Gone on Plasti Dip?
A couple of scenarios make Goo Gone the best remover for plasti dip. These scenarios include;
1. When you are in a hurry. From our guide above, have you seen how easy it is for you to remove plasti dip using Goo Gone? This is a process that should take minutes. Peeling it off doesn’t take long, but it may leave minor stains.
2. When you are dealing with stubborn plasti dip. Undoubtedly, plasti dip is one of the easiest coatings you can remove without professional help.
If you sprayed it wrong, it could be a source of headache when it’s finally time to remove it. You will need a special catalyst to speed up the removal process in such instances. Fortunately, we have Goo Gone.
3. When removing plasti dip in hard-to-reach areas. Removal of plasti dip requires you to peel it off. That’s easy enough.
What about areas that are hard to reach, such as the corners in your rims? Let alone peeling, being able to get your fingers in such areas is going to be a nightmare.
Goo Gone allows you to remove plasti dip in such areas without having to struggle so hard. Just spray the Goo Gone and let it eat up the plasti dip, wipe it off with a cloth, and you are done.
Goo Gone vs. Using Pressure Washer
A high-pressure washer is another famous technique car owners use to remove plasti dip on a car. When you compare these two options, we advise you to go with Goo Gone.
Plasti dip is formulated to withstand pressure washers. Unless it had already started peeling, then the pressure washer could make it come off.
But, well-sprayed plasti dip will pose a challenge to the pressure washer removal method. Also, this method requires a lot of work, and there is no guarantee of success.
But, with Goo Gone, you are assured that it will work. It is a more productive method of removing plasti dip. If you are dealing with worn-out plasti dip, don’t hesitate to blow it away using a high-pressure washer.
How is Goo Gone Able to Remove Plasti Dip?
Because it is a solvent, that’s the only answer. Solvents can dissolve other substances. The way Goo Gone dissolves stains and dirt, it does the same for plasti dip.
When you spray some on plasti dip, let it sit for a few minutes, it will turn into a gooey substance that you can wipe off using a cloth.
Because of this property, Goo Gone is a popular choice when it comes to the removal of plasti dip on cars.
Another thing you need to know about these two is that Goo Gone loosens up the adhesive properties of plasti dip. This makes wiping it off fairly easy.
What is the Best Plasti Dip Remover?
The manufacturer of plasti dip recommends that peeling it off is the best and safest method. However, we all know how creative DIY car detailers can be.
They are the guys who invented the use of Goo Gone, WD40, pressure washers, and a bunch of other things. The ideal method of removing plasti dip depends on your preferences as the car owner.
And don’t forget to factor in the safety of the method you are using. We all know that there are solvents that can get rid of plasti dip in a second but will harm the surface beneath in the process.
There are many methods of removing plasti dip. We will list each and include more details on why you should or shouldn’t use that method. It’s essential to familiarize yourself with various methods to avoid getting misled.
- Kerosene – This is the most effective method of removing plasti dip. Kerosene will eat through plasti dip in seconds and make it fall off on its own. But, kerosene will hurt car paint and other delicate finishes. Avoid using this product.
- Paint Thinners – Not unless the plasti dip is on a wooden surface, do not use paint thinners on car paint. It will strip off plasti dip fast and do the same for the paint beneath.
- Rubbing Alcohol – It has been used to clean stains on cars for a while now. And it will work wonders on removing plasti dip. You can use rubbing alcohol, but don’t let it sit for too long, and wash the area thoroughly once you are done.
- Goo Gone – This is a strong adhesive remover, and it will safely help you get rid of plasti dip. You can use this option. It’s not as harmful as the above on car paints and finishes.
- WD40 – Last on our list of plasti dip removers, we have WD40. It’s not very effective but will eventually get the job done.
Now that you are familiar with the different types of products you can use on Plasti Dip, choose wisely.
You can either go with the most effective options, such as kerosene, and put the safety of your car paint at risk. Or choose a subtler method that is both effective and safe.
As you decide on what to and not to use, remember to always clean the area thoroughly after using the above solvents. Also, avoid using scrapers or any other sharp objects that will damage your car paint.